Similar Searches:
cord 1m, boiron pulsatilla 1m, boiron thiosinaminum 1m, boiron causticum 1m, fork 1m bulk, boiron staphysagria 1m, boiron histaminum 1m, boiron iodium 1m, 1m 1 piece, 1m 62.5 125 multimode, 1m 8470, 1m fiber, 3ft go 1m, 8470 1m, boiron stramonium 1m, fork 1m, sff 8470 1m, belkin duplex multimode 1m, boiron folliculinum 1m, boiron sulphur 1m
See matches for tripplite 1m in these categories
1 to 20 of 23 products for
Tripplite 1m
Did you mean: tripp lite 1m ?
-
External SAS Cable, SFF-8088 (M-M), 1mTripp Lite's S524-01M External SAS cable features SFF-8088 to SFF-8088 "mini-SAS" connectors with heavy- duty metal backshells. This 4-channel Infiniband cable is constructed with high-performance Amphenol Spectra-Strip SKEWCLEAR cable, which features individually shielded parallel pairs, double EMI/RFI shielding, and 3GB/s performance. It is backed by Tripp Lite's lifetime warranty.Read MoreIn Stock
-
External SAS Cable, SFF-8470 to SFF-8088, 1mTripp Lite's S520-01M External SAS cable features "mini-SAS" SFF-8088 to SFF-8470 connectors with heavy- duty metal backshells. This 4-channel Infiniband cable is constructed with high-performance Amphenol Spectra-Strip SKEWCLEAR cable, which features individually shielded parallel pairs, double EMI/RFI shielding, and 3GB/s performance. It is backed by Tripp Lite's lifetime warranty.Read MoreIn Stock
-
20ft 1000BT CAT5e Patch Gray RJ45M/RJ45M Molded 350MHz
This 20-foot premium gray Cat5e cable is rated for 350MHz/1Gbps communications and is IEEE 802.3ab compliant. The PVC 4-pair stranded UTP cable features boots with integral strain-relief and RJ-45 male connectors on each end.Read MoreIn Stock
-
PDU Power Cord C13 To C20 7ftFeaturing IEC-320-C13 to IEC-320-C20 connectors, Tripp Lite's P032-007 Power Cord is ideal for use with Tripp Lite PDUs using IEC-320-C19 connectors. This cable features 12 gauge x 3 conductors, 10A, 120-230V.Read MoreIn Stock
-
Fiber Conditioning Patch Cable, SC-LC, 1mTripp Lite's mode conditioning cable is designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode conditioning cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a singlemode laser into ...Read MoreIn Stock
-
Duplex/Multimode Fiber Patch Cable, LC-ST, 1mTripp Lite's duplex/multimode fiber optic patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on one end, and ST connectors on the other. It has a PVC jacket and is FDDI- and OFNR-rated. Duplex/multimode fiber is most commonly used in fiber and Fibre Channel applications. It is backward compatible with 62.5 micron fiber and features built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks.Read MoreIn Stock
-
1M Duplex MMF Cable LC/LC 50/125 FiberRead More1m
Tripp Lite's multimode duplex fibre channel optic LC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks. Tripp Lite warrants this product to be free from ...In Stock
-
Duplex/Singlemode Fiber Patch Cable, ST-ST, 1mTripp Lite's duplex/singlemode fiber optic patch cable is manufactured from 8.3/125 zipcord fiber. The cable has ST connectors on each end and a PVC jacket, and is FDDI- and OFNR-rated. Duplex/singlemode fiber is most commonly used in LAN applications.Read MoreIn Stock
-
Fiber Patch Cable, Duplex Multimode, LC-LC, Red, 1mThis multimode duplex micron fiber optic LC/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has a PVC jacket and LC connectors on each end, and it is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.Read MoreIn Stock
-
Tripplite Tripp Lite printer cable 3.1 mRead More10ft
The IEEE 1284 Bi-Directional Parallel Printer Cable from Tripp Lite offers high speed communication between a PC and a printer. With gold plated connectors, this 10 foot cable offers excellent conductivity and supports high-speed bi-directional printIn Stock
-
1M Multimode Fiber Optic Cable MTRJ/LC 62.5/125Tripp Lite provides its customers with benefits no other company in the industry can match. Tripp Lite's vision for this millennium is built on the bedrock of its values: unsurpassed reliability, enhanced service and the best products available on the market today. The company supplies its customers with high-quality, reliable cable products that always bring the proper connection!Read MoreIn Stock
-
Duplex/Multimode 50/125um Aqua Fiber Patch Cable, LC-LC, 1mTripp Lite's laser-optimized multimode fiber (LOMMF) Aqua cable is perfect for use with 10Gb Ethernet applications. This 50/125um, LC/LC fiber optic cable provides nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of singlemode cable. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost vertical cavity surface emitting lasers (VCSELs) enable a cost-effective, high-bandwidth solution. LOMMF is ...Read MoreIn Stock
-
Serial ATA SATA Signal Cable 7PIN/7PIN 39IN LIFETIME WarrantyRead More39in - 1m
Connect your high-speed serial ATA device to a serial ATA controller. This Serial ATA Signal Cable supports data transfer rates of up to 1.5 Gbps. The cable is shielded to protect against EMI/RFI.In Stock
-
Duplex/Singlemode 8.3/125um Fiber Patch Cable, LC-ST, 1mTripp Lite's duplex/singlemode fiber optic patch cable is manufactured from 8.3/125 zipcord fiber. The cable has two LC connectors on one end, two ST connectors on the other, and a PVC jacket. It is FDDI- and OFNR-rated. The attenuation loss of this cable meets or exceeds the latest industry standards. This patch cable has twice the bandwidth throughput of multimode cable.Duplex/singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and ...Read MoreIn Stock
-
Duplex/Multimode 50/125um 10Gb Aqua Fiber Patch Cable, LC-SC, 1mTripp Lite's laser-optimized multimode fiber (LOMMF) Aqua cable is perfect for use with 10Gb Ethernet applications. This 50/125um, LC/LC fiber optic cable provides nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of singlemode cable. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost vertical cavity surface emitting lasers (VCSELs) enable a cost-effective, high-bandwidth solution. LOMMF is ...Read MoreIn Stock
-
Toslink Digital Optical Audio Cable, Toslink M-M, 1mThis premium Toslink Digital Optical Cable from Tripp Lite provides the ultimate in pure, digital audio quality. Using superior grade optical fiber, and precision polished optical connectors, this Toslink cable offers a clean signal at even the most extreme volumes to give you a detailed, rich sound. Tripp Lite warrants this cable to be from defects in material and workmanship for life.Read MoreIn Stock
-
Tripp Lite N806-01M 10Gb Multimode Duplex 50/125 LSZH Aqua Fiber Patch ...Tripp Lite introduces its new Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/SC Fiber Optic cables provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of singlemode cable, at a much reduced cost. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a ...Read MoreIn Stock
-
TRIPP FIBER LC/ST DUPLEX 1M 3.2FTRead More1m
Tripp Lite's multimode duplex fiber optic ST/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.In Stock
-
1M Duplex MMF Cable SC/SC 50/125 FiberRead More1m
Tripp Lite's multimode duplex fibre channel SC/SC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks. Tripp Lite warrants this product to be free from defects in ...In Stock
-
1M Duplex MMF Cable LC/SC 50/125 FiberRead More1m
Tripp Lite's multimode duplex fibre channel LC/SC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on one end and LC connectors on the other. It has a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks. Tripp Lite warrants this ...In Stock
Popular Searches
| search suggestions: | ||
|---|---|---|
Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava
Our International Sites: Japan | United Kingdom | Germany | Italy
Copyright © 2009 Become, Inc.
if yer hewmen, dawnt qlique dis linc